Dobinsons | 1-3" MRR Remove Reservoir 3-Way Adjustable Lift Kit | 24+ Land Cruiser

Overview

If you're looking for the complete package with no compromises, Dobinsons' MRR (Monotube w/ Remote Reservoir) 3-way adjustable kit truly leaves nothing on the table. Designed to be a zero-compromises setup, it provides unparalleled damping and longevity with its large remote reservoirs and individual damper control of high and low speed compression along with rebound control. Whether on the trail, the dunes, or the street, this kit is designed to perform. Made in Australia.

• Any lift of 2.5" or more requires diff drop kit and Aftermarket UCA
• Front Coil Spring Specs:
  • C59-816 (2") Stock Load
  • C59-820 (2.5") Stock Load / (2") 110-220lb Load
• Rear Coil Spring Specs:
  • C59-883V (0.5") Stock Load
  • C59-885V (2") 0-110lblb Load
  • C59-817V (2") 175-330lb Load
  • C59-819V (2") 550-770lb Load
  • C59-821V (2") 990-1210lb Load
• Front Strut Specs:
  • MRA59-A660 (0-2" Lift)
  • MRA59-A440 (2.5-3" Lift) - Long Travel
• WA59-571K - Upper trailing arms - Vehicles with headlight adjuster sensor will require an additional clamp bracket.

• 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
• 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
• 20 Stage Low Speed Compression - For creepy crawling and cornering
• 15 Stage Rebound - Control your coils, prevent bucking
• 60mm CNC Machined High Flow Billet Aluminium Race Piston
• 2.6"" Precision Honed Shock Body
• 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
• Upgraded 3 Stage FKM-HNBR Sealing System
• TSUGAMITM CNC machined components for precise tolerances
• ParkerTM Braided High Pressure Hoses
• 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
• T6 6061 Height Adjustable Spring Seat
• Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
• 60mm Full 6063 aluminum remote reservoir 
• Lightweight CNC Machined Low Friction floating piston
• High Quality OEM Grade Natural Rubber Bushings
• Single Piece Lower Leg
• EDP Surface Protection
• Direct Bolt-On Design
• CNC TIG Precision Welded Body End Mounts
• Fully Rebuildable Design

NOTE: Coil seat for MRA59-A660 / MRA59-A440 should be set at 237mm from the strut bushing eye to top of coil isolator.